En 1090 - Certificare Auditori Calitate

Welding certification according to EN 1090

Certifications for steel and aluminum structures

Challenge:

As of summer 2014, the requirements for the manufacture of structures and structural steelwork specified in this standard will be mandatory for all manufacturers of steel and aluminum structures. This standard was originally intended to be introduced until 2012, but was postponed for a transitional period.

In addition, parts of the standard ISO 3834, EN 287 Welding tests and the availability of a welding supervisor as well as welding processes and corresponding welding power sources must be provided in addition, if you have not yet obtained them. In addition, several components must comply with an ISO 9001 and EN 3834 certification

We accompany you during the implementation of the EN 1090 certification

The best price for the complete processing of your Exec 2 process, which is the standard case with EN 1090, unless stated otherwise.
Design the process so that it can be introduced concomitantly in your process.
Employees who process the entire process, they go about their usual work.
We offer existing welding processes for machines of different types.
We have ready processes for MAG processes, currently only available from us. You do not have to reinvent the wheel.
The best offer for the EN 287 examinations and the accompaniment to obtain the certificates.
Offer to standardize the ISO 9001, ISO 140001, ISO 1090, EN 287 and OHSAS certification
Accompaniment to certification, and subsequent certifications

If a company supplies to the construction industry without a valid EN 1090, the building authority can have the component removed.
"Austrian Society for Welding Technology"

domeniu

As part of the complete certification, we offer you the process by performing the following steps:

Preliminary talk at the company
Discussion of the procedure
Analysis of the existing special situation
Purchase personalized standards (can be purchased cheaply in Austria via the WKO, these are personalized)
Provisions of the Exec classes and declaration procedures.
Accompanying to the EN 287 Welding Certifications
Machine tests for compliance with the standard requirement
Reviews of the WPQR
Create internal documents (factory production control, ISO 9001 elements, optical control, tolerances, maintenance plans, test procedures and test instructions.
Support in the training or integration of welding supervision
Customize the production, workflow until the application of the CE mark
Coordination with the certification organization
Standards study
Factory set up, storage and marking of production machines, QM means and additives
Pre-audit
main audit
Follow-up audits

Etape

• Due to the ongoing consultations we offer you the certification as "payment by certificate". ie in case of success

• We are not advisors who redesign your company, but design the EN 1090 to be operational.

• You are the experts, we support and accompany you.

• We examine the current state and implement it in EN 1090

• We make sure that the processes can be integrated into your existing system

• For this we work with technology partners: welding machine manufacturers and the best certification bodies.

Avantaje

The certification according to EN 1090-1 gives you the following advantages.

• We are the only company currently offering a complete package at the best price.

• You get the welding processes for all your machines.

• Your products may be traded in the European Union

• They comply with legal requirements in the EU

• An entire European standard is introduced instead of many individual ones.

• You benefit from our know-how in terms of implementation.

cERINTELE

The test and warning obligation states that a contractor has to check the documents provided to him for completeness and correctness, if he can.
It is therefore not an "EN 1090 duty", but the duty of the examination of foreign documents, plans, materials, etc. in the context of a construction work.
Due to the fact that it is a harmonized standard, EN 1090 is legally binding and of course has long been regarded as a "recognized rule of technology".

The duty to inspect and warn in Austria is a duty of contractors for construction works. The obligation laid down in ÖNORM B 2110 (General Contract Terms for Works - Contract Work Standard) means that an entrepreneur must review the execution documents, instructions, materials or inputs provided by the client. The customer must be informed in writing of any defects or expected damages. If the entrepreneur fulfills his test and warning obligation, and the client instructs the unaltered execution or does not make a decision, the entrepreneur is released from his liability and warranty in the corresponding case of damage.

Știri actuale din Elveția

Vizită la Rosenbauer 11-22-2017 - Pe 22 noiembrie 2017, o vizită la compania Rosenbauer din...

Link-uri rapide

EN 1090: Anunțuri digitale

Asistență

Unterstützung

Lucrezi în ritmul tău. Poți gestiona proiectele tale independent prin intermediul portalului nostru, precum și poți solicita asistență personalizată. Prin urmare, ne-am angajat să îți oferim oportunitatea de a-ți proiecta propriile procese, fără a fi nevoie să renunți la asistența oferită prin intermediul portalului nostru.

Administrare online

Vă oferim posibilitatea de a vă desfășura singuri procesele de certificare, dar fără a fi nevoie să renunțați la know-how-ul sau la sprijinul unor angajați experimentați. Sistemul online este conceput pentru o varietate de certificări și vă oferă, de asemenea, liste de întrebări frecvente, precum și formulare și tabele predefinite, precum și un modul pentru a clarifica întrebările deschise cu unul dintre angajații noștri.

Modificare certificare

În vremurile rapide în care trăim, schimbările din viața de afaceri sunt o însoțire constantă. Structurile fixe care se construiau de-a lungul multor ani pot fi acum distruse foarte rapid. Există motive interne și externe pentru aceasta. CS oferă o imagine de ansamblu asupra conformității în timpul schimbărilor.

Cooperare

cooperare

Întrucât cu toții avem doar un timp și o capacitate financiară limitate și dorim să oferim clientului un serviciu complet, cooperările au sens doar între organizații conexe. Acestea au o structură fiabilă, precum și o bună armonie interpersonală.

În 1090